Category |
Component |
Test Kit |
Interval |
Comments |
Turbines |
Natural Gas |
IND 3 |
3 mon / 1500 hr |
Test kit includes ferrography to monitor for rapid system failures (e.g. rolling element bearings), particle counting to monitor fluid cleanliness, and TAN to monitor fluid degradation. |
|
Steam |
IND 3 |
3 mon / 1500 hr |
" |
|
Blowers |
Blower |
IND 3 |
1 mon / 500 hr |
" |
|
Hydraulics |
Hydraulic System |
IND 2 |
1 mon / 500 hr |
Test kit includes particle counting to monitor fluid cleanliness, and TAN to monitor fluid degradation. |
|
Extruder |
IND 2 |
1 mon / 500 hr |
" |
|
Press |
IND 2 |
1 mon / 500 hr |
" |
|
Compressors |
Refrigeration Comp. |
IND 2 |
1 mon / 500 hr |
Includes Karl Fischer to monitor fluid cleanliness levels, and TAN to monitor fluid degradation. |
|
Chillers |
IND 2 |
1 mon / 500 hr |
Includes Karl Fischer to monitor fluid cleanliness levels, and TAN to monitor fluid degradation. |
|
Air and Gas Comp. |
IND 2 |
1 mon / 500 hr |
Includes Karl Fischer to monitor fluid cleanliness levels, and TAN to monitor fluid degradation. |
|
Gears |
Gearbox |
IND 1 |
1 mon / 500 hr |
Routine analysis kit. |
|
Worm Gear |
IND 1 |
1 mon / 500 hr |
Routine analysis kit. |
|
Bevel Gear |
IND 1 |
1 mon / 500 hr |
Routine analysis kit. |
|
Reduction Gear |
IND 1 |
1 mon / 500 hr |
Routine analysis kit. |
|
Differential |
IND 1 |
1 mon / 500 hr |
Routine analysis kit. |
|
Final Drive |
IND 1 |
1 mon / 500 hr |
Routine analysis kit. |
|
Gear Extruder |
IND 2 |
1 mon / 500 hr |
Includes particle count to monitor fluid cleanliness levels, and TAN to monitor fluid degradation. |
|
Engines |
Diesel Generators |
IND 1 |
1 mon / 500 hr |
Routine analysis kit. |
|
Fluids |
New Unused Oil |
IND 1 |
every oil shipment |
Establish baseline for your oil. |
|
Thermal Oil |
HTTFL |
6 mon / 3000 hr |
Test kit includes flash point. |
|
Special Sampling Considerations |
Follow up on abnormal samples |
IND 3 |
WearCheck advises that ferrographic analysis be performed with resamples on equipment that tested abnormal. Filter analysis allows the diagnostician to locate and detect major wear situations. |
|
Extended oil drain intervals |
IND 2 |
Any equipment that is undergoing extended oil drain interval testing should use IND 2 test kits. These kits include TAN testing to monitor the degradation of the oil, as well as the build up of acids in the oil. Oils with high TAN levels generally experience oil thickening, sludging, improper oil flow, and corrosion of components. |
|
Critical Systems |
IND 3 |
IND 3 kits include the most comprehensive battery of tests to monitor the oil condition, wear condition, and contamination levels of the system. |